9. Error Messages
If the following error messages does not help to solve the problem, please call or write an e-mail to the dot2
support.
E-Mail: support@ma-dot2.com
Phone: +49 5251 688 865 27
Emergency Phone: +49 5251 688 865 99 (If you are in the middle of a production with problems)
Error Reason
# 0 Unknown error The console have an unknown error.
# 1 Unknown command The entered command is unknown.
# 2 Input too long The entered command is too long.
# 3 Illegal character The entered command is illegal.
# 4 Command not
implemented
The entered command is not supported from the console.
# 5 Number expected The console expects a number.
# 6 IP expected The console expects an IP address.
# 7 Number too long The entered number is too long.
# 8 Number to small
The number for the entered command is too small (min =
1).
# 9 Number to big The number for the entered command is too big (max = 1).
# 10 Expected The console expects more input.
# 11 Expected
argument
The entered command is missing an argument.
# 12 Expected name
The console expected a name, e.g. a canceled label
command.
# 13 Illegal name
The entered object name is not allowed. Use only English
characters.
# 14 Object does not
exist
The object you tried to work with does not exist, e.g. assign a
function to an executor with no cues stored.
# 15 Object not
accessible
The entered object is not accessible.
# 16 Resize forbidden The entered command to resize is forbidden.
# 17 Delete forbidden The entered command to delete this object is forbidden.
# 18 Create forbidden The entered command to create this object is forbidden.
To Next Page
Loading...
Need help?
General