5.56. Select key
Pressing the Select key gives you the Select command.
This can be used to select the fixtures used on an executor.
E.g. you need to select all the fixtures used in the cue list on executor 2:
Press Select and now press any of the keys associated with executor number 2.
Or if you need to select the fixtures stored in cue number 3 on executor 5:
Select Cue 3 Exec 5 Please
Related link
Select command
5.57. Set key
The Set key is used together with the Next and Prev key.
This is used when you have selected some fixtures and you want to work with one of the fixtures in your selection.
Then you can use the Next and Prev keys to step through your fixtures. If you need to reselect all the fixtures in
your selection, then you can press Set .
Related links
Next Key
Prev (Previous) Key
5.58. Setup key
Pressing the Setup key will open and close the Setup Window on screen 1.
Here you can change the setup of your show and console. Here you also add and patch fixtures.
Related link
Setup Window
5.59. Speed key
To Next Page
Loading...