Let´s assume, you will clone fixture 31 at 32 and you will keep the defined position of fixture 32.
1. Press + Copy (= Clone) Fixture 31 At 32 Please .
The console will ask you to choose the clone method.
2. Tap Low Prio Merge .
Fixture 32 has now the same values as fixture 31 and the previous defined values (position).
Example Merge
Cue Fixture 1 Fixture 2
1 Dimmer open (entered value)
2 Dimmer open (entered value) Dimmer 50 % (entered value)
3 Dimmer open (tracked value) Dimmer 50 % (entered value)
Let´s assume, you will clone fixture 1 at fixture 2 and add only the previous defined values and not the tracked
values.
1. Press + Copy (= Clone) Fixture 1 At 2 Please .
The console will ask you to choose the clone method.
2. Tap Merge .
Cue
Fixture 1
(before merge)
Fixture 2
(before merge)
Fixture 2
(after merge)
1
Dimmer open
(entered
value)
Dimmer open
2
Dimmer open
(entered
value)
Dimmer 50 %
(entered
value)
Dimmer open (because this was an entered value
from fixture 1)
To Next Page
Loading...
Need help?
General