MA dot2 User Manual

© 2015 MA Lighting Technology GmbH - Dachdeckerstr. 16 - D-97297 Waldbüttelbrunn - Germany - www.malighting.com
dot2 User Manual
6.8. Change Functions of Executor Buttons Window
To go to the Change Functions of Executor Buttons Window, open the Executor Bar Window and tap the tool in
the Title Bar.
In this window, you change the functions of the executor buttons from the current page of the executor bar window.
To change a function, tap on the virtual button in the window. It opens the Select Function of Executor Window.
The functions of the main executor buttons is fixed and not changeable.
You can only change functions of taken executor buttons.
If an executor button is free, it is displayed as [Empty].
To leave the Change Functions of Executor Buttons Window, press in the Title Bar. You are back in the
Executor Bar Window.
Related Links
Select Function of Executor Window
Executor Bar Window
Icons
System Colors - Executor
186

MA dot2 Specifications

General

Brand	MA Lighting
Operating System	dot2 OS
Category	Lighting Console
Protocols	Art-Net, sACN
DMX Channels	4096
Ethernet Ports	2
Power Supply	100-240V, 50/60Hz