Example Normal
Let´s assume, you will store cue 2.1 between cue 2 and cue 3 with tracking shield.
Cue Fixture 1 Fixture 2 Fixture 1 Fixture 2
1 Dimmer At 50 Dimmer At 50 Dimmer At 50 Dimmer At 50
2 Dimmer At 0 Dimmer At 100 Dimmer At 0 Dimmer At 100
2.1 Dimmer At 33 Dimmer At 33
3 Dimmer At 0 (tracked) Dimmer At 80 Dimmer At 33 (tracked) Dimmer At 80
1. Press Store Cue 2 . 1 and tap on the main executor in the executor bar view.
2. Tap Ok . Normal is selected by default.
Cue 2.1 is stored between cue 2 and cue 3. Cue 3 is tracking the dimmer value from fixture 1.
Example Cue Only
Let´s assume, you will store cue 2.1 between cue 2 and 3 without affect the following cues with tracking values.
Cue Fixture 1 Fixture 2 Fixture 1 Fixture 2
1 Dimmer At 50 Dimmer At 50 Dimmer At 50 Dimmer At 50
2 Dimmer At 0 Dimmer At 100 Dimmer At 0 Dimmer At 100
2.1 Dimmer At 33 Dimmer At 33
3 Dimmer At 0 (tracked) Dimmer At 80 Dimmer At 0 Dimmer At 80
1. Press Store Cue 2 . 1 and tap on the main executor in the executor bar view.
2. Tap Cue Only and then Ok .
Cue 2.1 is stored between cue 2 and cue 3. Cue 3 has no tracking values from cue 2.1.
Example Merge
To Next Page
Loading...
Need help?
General