MA dot2 - Page 196

© 2015 MA Lighting Technology GmbH - Dachdeckerstr. 16 - D-97297 Waldbüttelbrunn - Germany - www.malighting.com
dot2 User Manual
1. Select fixture ID 32 in the fixtures view.
2. Double press Please . All values from fixture 32 are in the programmer.
3. Press Store and tap on the main executor in the executor bar view.
4. Tap Remove .
The fixture ID 32 is removed from the existing cue 1 on the main executor.
Example Overwrite
Let´s assume, you will overwrite the cue 1 on the main executor with the current programmer values.
1. Press Store and tap on the main executor in the executor bar view.
2. Tap Overwrite .
Cue 1 on the main executor has now the current programmer values. All previous values from the existing cue are
deleted.
Example Create Second Cue
Let´s assume, you will create a cue list on the main executor.
1. Press Store and tap on the main executor in the executor bar view.
2. Tap Create second cue .
The current programmer values are stored as a second cue on the main executor.
Encoder Bar Functions
196