The slider change into a select speed in rpm (revolution per minute) slider.
Stop:
Tap to stop the spinning.
Spin <:
Tap to let the entire gobowheel spin counter clockwise.
The slider change into a select speed in rpm slider.
Wheel Shake:
Tap to let the gobowheel shakes up and down.
Rotate >:
Tap to rotate the selected gobo clockwise.
The slider change into a select speed in rpm slider.
Rotate <:
Tap to rotate the selected gobo counter clockwise.
The slider change into a select speed in rpm slider.
Index:
Tap to set the index position of the selected gobo.
The slider change into a select position in degrees slider.
Raw Gobo Views
The raw gobo views are located after the gobo views.
In the raw gobo view, you control the raw gobo values in natural values (0-100) from the selected fixtures.
Encoder Bar Functions
To Next Page
Loading...