press and hold a cell of a fixture type in the patch and fixture schedule, tap Import
In this view, you select the fixture type and import it to the Patch and Fixture Schedule in the current show file.
This view has three fixture type columns and one in information area.
The orange bar at the left of the cells shows the current selection.
To search for a specific manufacturer, device name or mode: Tap at the right of the green edit line and type in.
To delete the content of the green edit line, tap .
To confirm and apply the selection, tap in the title bar. The import fixture type window will close.
To leave the Import Fixture Type Window, tap in the title bar or press Esc on the console.
Column Manufacturer
This is the first column in this window.
In this column are all available manufacturer listed.
There are two lines in a cell.
The first line displays the name of the manufacturer.
The second line items displays all to the manufacturer available modes in the mode column.
Column Device Name
To Next Page
Loading...