6.42. Off... Window
To open the Off... Window, press and hold + Off at the console.
The Off... Window opens at screen 1.
To apply a off function, tap at the button or press the encoder.
In the Off... Window are four buttons available:
Everything off:
Turns all executor off, resets all special masters and clears the programmer.
Turn all Executors off:
Turns off all running cues and chasers.
Reset all Special Masters:
Turns off the program time master.
Resets the rate master to 1:1.
Resets the group master to 100%.
Clear Programmer:
Deselect the selected fixtures in the fixtures view.
Deletes all values in the programmer and set them back to the default values or to values from executors.
Double-check the programmer values in the fixtures sheet view.
Clear programmer is the same function as press the Clear Key twice.
Encoder Bar Functions
To Next Page
Loading...