7.15. Delay Command
This page describes the syntax and how to use the Delay command.
To go to the Delay command it is necessary to press another function key before, e.g. Store and then three times
Time .
Description
With the Delay command you indicate delay times for cues.
Syntax
Create a new cue 1 with a delay time of 3 seconds.
Store Cue 1 Delay 3
Example
Let´s assume, you will store a new cue 1 on the main executor with a delay time of 3 seconds.
Press Store 1 (= Cue 1) three times Time (= Delay) 3 Please .
Cue 1 is stored on the main executor with a delay time of 3 seconds.
Double check the delay time in the cues view.
Related Links
Time Key
Cues View
7.16. Delete Command
This page describes the syntax and how to use the delete command.
To go to the delete command, press Delete on the console.
Delete is in the command line, now.
Description
With the delete command, you can
delete cues from a cue list
delete pool objects (e.g. preset type, groups) from the respective pool (e.g. position preset type pool, groups pool)
unpatch fixtures from the DMX universe
Syntax
1. Delete a cue from a cue list.
To Next Page
Loading...