Example 4
Let´s assume you will patch fixture 1 to a the DMX address 2.1.
Press + Label (= Assign) Fixture 1 At DMX 2 . 1 Please .
Fixture 1 is patched at DMX address 2.1.
Double-check the DMX address in the DMX View or the Patch and Fixture Schedule.
Example 5
Let´s assume you will unpatch fixture 1 from the DMX address 1.7.
Press Delete DMX 1 . 7 Please .
The fixture with the DMX address 1.7 is unpatched.
Double-check the DMX address in the DMX View or the Patch and Fixture Schedule.
Related Links
DMX View
Patch and Fixture Schedule
Assign Command
What is a DMX Tester?
7.18. DmxUniverse Command
To Next Page
Loading...