If you press Move after a Replace is in the command line, the command will be With.
Description
With the replace command, you can replace
Presets with Presets
Fixtures with Fixtures
Groups with Groups
for an executor or in the show file.
Syntax
1. Replace a preset if it is used on a executor.
Replace Preset 1 With Preset 2 If ExecButton 1.2
2. Replace a fixture.
Replace Fixture 1 With Fixture 2
3. Replace a group.
Replace Group 1 With Group 2
Example 1
Let´s assume, you will replace position preset 4 "Singer" with position preset 5 "Piano" if it is used on executor 2.
1. Open the position presets pool.
2. Press + Move (=Replace), tap at preset 4 , press Move (=With), tap at preset 5 , press If and
executor button 2 Please .
Replace Preset 2.4 With Preset 2.5 If ExecButton 1.2
The console gives you an overview about how many objects will change and asks, to confirm the replace operation.
To apply and leave the window,tap Ok .
To apply and get a detailed report, tap Ok Create Report .
Preset 4 "Singer" is replaced with preset 5 "Piano" if it was used on executor 2.
Example 2
Let´s assume, you will replace fixture 1 with fixture 2 if it is used on executor 1.
Press + Move (=Replace) Fixture 1 Move (=With) Fixture 2 If , press executor button 1 .
Replace Fixture 1 With Fixture 2 If ExecButton 1.1
To Next Page
Loading...