Syntax
Store a cue on an executor.
Store Cue 1 ExecButton1
Store a selection of fixtures as a group in the groups view.
Store Group 1
Store an active dimmer value as dimmer preset in the dimmer presets pool.
Store Preset 1.1
Example 1
Let´s assume you will store the created cue as cue 1 on the main executor.
There are three different ways to do this.
a) Press Store 1 (=Cue 1) Please .
b) Press Store 1 (=Cue 1) and tap on the main executor in the executor bar view.
c) Press Store and press the large Go on the console.
If it is the second cue on the executor button, the console will ask you to choose the store method.
The cue is stored on the main executor as cue 1.
Example 2
To Next Page
Loading...