214683 13 Revision A
1.8 Understanding Safety Signs
Figure 1.22: MD #113482
MD #113482
General hazard pertaining to machine operation and
servicing
CAUTION
To avoid injury or death from improper or unsafe machine
operation:
• Read the operator’s manual and follow all safety
instructions. If you do not have a manual, obtain one from
your Dealer.
• Do NOT allow untrained persons to operate the machine.
• Review safety instructions with all Operators every year.
• Ensure that all safety signs are installed and legible.
• Make certain everyone is clear of machine before starting engine and during operation.
• Keep riders off the machine.
• Keep all shields in place and stay clear of moving parts.
• Disengage header drive, put transmission in Neutral, and wait for all movement to stop before leaving
operator’s position.
• Stop the engine and remove the key before servicing, adjusting, lubricating, cleaning, or unplugging machine.
• Engage safety props to prevent lowering of header or reel before servicing in the raised position.
• Use slow moving vehicle emblem and flashing warning lights when operating on roadways unless prohibited
by law.
Figure 1.23: MD #131391
MD #131391
Crushing hazard
DANGER
• Rest header on ground or engage safety props before
going under unit.
SAFETY
To Next Page
Loading...
