MacDon FlexDraper FD140 - John Deere S7 Series Combines; Setting up Header (John Deere S7 Series)

214683 230 Revision A
3.8.12 John Deere S7 Series Combines
Setting up Header (John Deere S7 Series)
NOTE:
Changes may have been made to combine controls or display since this document was published. Refer to
combine operator’s manual for updates.
1022757
A
Figure 3.386: John Deere S7 Display
1. Press the header button (A) on the panel below the
display. The HEADER page opens.
1022759
A
Figure 3.387: John Deere S7 Display –
Header Page
2. Select the HEADER TYPE field (A). The HEADER
DETAILS window opens.
OPERATION