214683 43 Revision A
3.6 Header Setup
3.6.1 Header Attachments
Several attachments to improve the performance of your header are available as options that can be installed by
your MacDon Dealer. Refer to 6 Options and Attachments, page 545 for descriptions of available items.
3.6.2 Header Settings
The following tables provide a guideline for setting up the FD1 FlexDraper
®
Header; however, the suggested
settings can be changed to suit various crops and conditions not covered in the tables.
Refer also to 3.6.4 Reel Settings, page 56.
For FM100 auger configurations, refer to 4.1 Float Module Feed Auger Configurations, page 307.
OPERATION
To Next Page
Loading...
