MacDon FlexDraper FD140 - Adjusting Auto Reel Speed (CLAAS 500 Series)

214683 248 Revision A
Adjusting Auto Reel Speed (CLAAS 500 Series)
The preset reel speed can be set when the automatic header functions are activated.
NOTE:
Changes may have been made to the combine controls or display since this document was published. Refer to the
combine operator’s manual for updates.
1003752
Figure 3.428: CLAAS Combine Display
1. Use the < or > key to select REEL WINDOW. Window
E15 will display the current advance or retard speed of
the reel in relation to the ground speed.
1003749
A
B
C
Figure 3.429: CLAAS Combine Controls
2. Press the OK key (C) to open the REEL SPEED
window.
3. Use the – key (A) or the + key (B) to set the reel speed
in relation to the current ground speed. Window E15 will
display the selected reel speed.
OPERATION