MacDon FlexDraper FD140 - Extended Center Filler; Rock Retarder; Stub Guard Conversion Kit

214683 550 Revision A
6.3.3 Extended Center Filler
1025213
Figure 6.9: Extended Filler
The Extended Center Filler kit (MD #B6450) includes a
reinforced flap 3 mm (1/8 in.) thick that extends onto the
feed draper of a MacDon FM100 Float Module to help
reduce loss when cutting crops such as beans and peas.
Installation instructions are included with the kit.
MD #B6450
6.3.4 Rock Retarder
1024051
A
Figure 6.10: Rock Retarder
The rock retarder (A) consists of a steel angle that is bolted
to the cutterbar immediately aft of the knife, and helps
prevent rocks and large debris from being swept onto the
drapers with the crop. Installation instructions are included
with the kit.
Order bundles by header size:
• 9.1–10.7 m (30–35 ft.) – MD #B5084
• 12.2–13.7 m (40–45 ft.) – MD #B5085
6.3.5 Stub Guard Conversion Kit
1001244
Figure 6.11: Stub Guards
Stub guards, complete with top guides and adjuster shoes,
are designed to cut tough crops.
Installation and adjustment instructions are included in
the kits.
Order one of the following bundles according to your
header size:
• 4.6 m (15 ft.) – MD #B5009
• 6.1 m (20 ft.) – MD #B5010
• 7.6 m (25 ft.) – MD #B5011
• 9.1 m (30 ft.) – MD #B5012
• 10.7 m (35 ft.) – MD #B5013
OPTIONS AND ATTACHMENTS