MacDon FlexDraper FD140 - Page 255

214683 231 Revision A
1022768
A
Figure 3.388: John Deere S7 Display – Header
Details Window
3. Verify correct header width is displayed under WIDTH.
4. To change header width, select field (A). The WIDTH
window opens.
1022769
Figure 3.389: John Deere S7 Display – Setting
Header Width
5. Use the on-screen keypad to enter the correct header
width, and then press OK.
1022760
A
Figure 3.390: John Deere S7 Display – Header
Details Window
6. Press window close button (A) in top right corner of the
window to return to the HEADER page.
OPERATION