214683 16 Revision A
• Disengage header drive, put transmission in Neutral, and wait for all movement to stop before leaving
operator’s position.
• Stop the engine and remove the key from the ignition before servicing, adjusting, lubricating, cleaning, or
unplugging machine.
• Engage safety props to prevent lowering of raised unit before servicing in the raised position.
• Use slow moving vehicle emblem and flashing warning lights when operating on roadways unless prohibited
by law.
Figure 1.30: MD #184422
MD #184422
Chain drive hand and arm entanglement hazard
WARNING
• Do NOT open or remove safety shields while engine is
running.
• To avoid injury, stop the engine and remove the key
before opening shield.
Figure 1.31: MD #220797
MD #220797
Tipping hazard in transport mode
WARNING
• Read the operator’s manual for more information on
potential tipping or rollover of header while transporting.
SAFETY
To Next Page
Loading...
