214683 396 Revision A
Every 250 Hours
Use high temperature extreme pressure (EP2) performance grease with 1% max molybdenum disulphide
(NLGI Grade 2) lithium base unless otherwise specified.
Figure 5.10: Every 250 Hours
A - Reel U-joint (One Place)
53
B - Flex Linkage (Two Places) – Both Sides
MAINTENANCE AND SERVICING
53. U-joint has an extended lubrication cross and bearing kit. Stop greasing when greasing becomes difficult or if
U-joint stops taking grease. Overgreasing will damage U-joint. Six to eight pumps are sufficient at first grease
(factory). Increase grease interval as U-joint wears and requires more than six pumps.
To Next Page
Loading...
