214683 52 Revision A
Table 3.8 Recommended FD1 Series / FM100 Combine Header Settings for Edible Beans
Stubble Height On ground
Stabilizer
Wheels
34
Storage
Skid Shoe
Position
Up or middle
Crop
Condition
Divider Rods
Draper Speed
Setting
35
Header
Angle
36 37
Reel Cam
Reel
Speed %
38
Reel Position
Upper Cross
Auger
Light
On
8D25–10 6 or 7 Not required
Normal
On
7
B – C
2 10 6 or 7 Not required
Heavy
On
7
B – C
2 10 6 or 7 Not required
Lodged
On
7
D25–10 6 or 7 Not required
34. Stabilizer wheels are used to limit the side-to-side movement when cutting off the ground in rolling terrain and to minimize bouncing.
35. Setting on FM100 draper control.
36. Set header angle as shallow as possible (setting A) with center-link and skid shoes while maintaining cutting height.
37. Cutting height is controlled with a combination of skid shoes and header angle.
38. Percentage above ground speed.
To Next Page
Loading...
