Crane operation
11.9 Heating and air-conditioning system
Operating manual 3 302 819 en 11 - 159
GMK3060
13.12.2018
Switching off This section only describes how to switch off the heater manually. If the heater is
switched on automatically, it switches off after the set heating period has elapsed;
à Setting the heating period, p. 11 - 158.
• To switch off, press the button (1) once. The heater goes off immediately.
H
If you switch off the ignition while the heater is in operation, the heater will
continue running for a certain period. You can set this remaining time;
à p. 11 - 159.
Setting the
remaining time
If the ignition is turned off with the heating turned on, the heating will remain
switched on for the remaining time.
• Switch on the heater using the (1) button
• Switch off the ignition.
The heater continues to run and the remaining run time set last flashes,
e.g. 48 minutes.
• Set the desired remaining heating period with the buttons (1) or (2) in the
flashing display. You can set a remaining time of 1 to 120 minutes.
• Wait for 5 seconds until the current time is displayed.
The remaining time is now set.
To Next Page
Loading...
Need help?
General
