ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿
28 Parameter
917 Coulometer
ï¿ï¿ï¿ï¿ï¿ï¿ï¿ï¿
259
Variable Description
EP# Volume/quantity of endpoint EP# (# = 1 - 9)
EC# Charge at endpoint EP# (# = 1 - 9)
EM# Measured value of endpoint EP# (# = 1 - 9)
EF# ERC of endpoint EP# (# = 1 - 9)
ET# Temperature at endpoint EP# (# = 1 - 9)
ED# Time at endpoint EP# (# = 1 - 9)
ESI# Recognition of endpoint EP# (# = 1 - 9)
Endpoint found = 1, no endpoint = 0
MIM Initial measured value, i.e. measured value prior to the processing of the start conditions
MIT Initial temperature, i.e. temperature prior to the processing of the start conditions
MSA Volume for start volume
MSP Volume for start measured value
MSS Volume for start slope
MSV Volume for all the start conditions
MSD Duration of start conditions
MSM Start measured value, i.e. measured value after the processing of the start conditions
MST Start temperature, i.e. temperature after the processing of the start conditions
MCD Total duration of the titration, measurement or calibration
MTM Type of temperature measurement (Pt1000, NTC or manually)
Format = Text
MDD Duration of effective dosing, i.e. without filling times, pauses
MDC Drift for drift correction
DDC Time for drift correction
MCV End volume, i.e. total dosed volume at the end of the titration
MCQ End quantity, i.e. total amount of removed water or of generated bromine, respectively, at the end
of the titration (in µg)
MCC Final charge, i.e. total charge in mAs at the end of the titration
MCM End measured value
MCT End temperature
MMP Number of measuring points in measuring point list
MTS Stop type
Format = Text
LV Currently dosed volume of the ongoing determination
LM Current measured value of the ongoing determination
To Next Page
Loading...
Need help?
General
