Metrohm 917 User Manual

28.5 Calculations
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
260
￭￭￭￭￭￭￭￭
917 Coulometer
Variable Description
LD Current duration of the ongoing titration or measuring command
LT Current temperature of the ongoing determination
Sensor
MEN Electrode zero point pH(0) or E(0)
MSL Electrode slope
MVA Electrode variance (mathematically only defined for three standards or more);
MCL Cell constant of conductivity measuring cell
Evaluations
FP# Volume of fixed endpoint FP# (# = 1 - 9)
FM# Measured value of fixed endpoint FP# (# = 1 - 9)
FT# Temperature at fixed endpoint FP# (# = 1 - 9)
FD# Time at fixed endpoint FP# (# = 1 - 9)
HP# Volume of pK value / half neutralization potential HP#
HM# Measured value of pK value / half neutralization potential HP#
HT# Temperature at pK value / half neutralization potential HP#
HD# Time at pK value / half neutralization potential HP#
XIP Volume/quantity of minimum measured value
XIM Minimum measured value
XIT Temperature at minimum measured value
XID Time at minimum measured value
XAP Volume/quantity of maximum measured value
XAM Maximum measured value
XAT Temperature at maximum measured value
XAD Time at maximum measured value
BP# Volume of break point BP# (# = 1 - 9)
BM# Measured value of break point BP# (# = 1 - 9)
BT# Temperature at break point BP# (# = 1 - 9)
BD# Time at break point BP# (# = 1 - 9)
RD# Mean rate in time slot # (# = 1 - 9)
RDS# Standard deviation for RD# (# = 1 - 9)
RDC# Correlation coefficient for RD# (# = 1 - 9)
RM Mean rate for whole range
RMS Standard deviation for RM

Metrohm 917 Specifications

General

Brand	Metrohm
Model	917
Category	Laboratory Equipment
Language	English