Mindray BeneVision TM80 - Changing the SpO2 Settings

Monitoring Pulse Oxygen Saturation (SpO2) (Optional) Changing the SpO2 Settings
TM80 Telemetry Monitor Operator’s Manual 9 - 5
Connecting the Nellcor SpO
2
module
9.5 Changing the SpO
2
Settings
You can change the SpO
2
settings from the SpO
2
menu.
9.5.1 Configuring the SpO
2
Setup
Enter the SpO
2
menu in either of the following ways:
■ On the main screen, tap the SpO
2
digital area or SpO
2
waveform area.
■ Press the key to enter the main menu → tap Parameter Setup → select
SpO
2
.
N
ELLCO
R
SpO
2
sensor
SpO
2
sensor connector
SpO
2
module