Wireless Specification Product Specifications
A - 8 TM80 Telemetry Monitor Operator’s Manual
A.7.2 Wi-Fi Specifciations
A.7.2.1 Technical Specifications
A.7.2.2 Implemented Functions
TM80 transmits waveforms, parameters, status and technical alarms of ECG, SpO
2
, RESP;
and parameters, status and technical alarms of NIBP to the CMS. The waveforms, param-
eters, status and technique alarms displayed on the CMS are consistent with TM80.
TM80 can work well with APs which support POE (e.g. AIR-AP2802I-H-K9, working with
AC: AIR-CT2504-15-K9), if the RSSI from APs is higher than -65 dbm.
A.7.2.3 Function Specifications
Protocol
IEEE 802.11 a/b/g/n/ac
Modulation mode
DSSS and OFDM
Operating frequency
2412 MHz to 2472 MHz
5180 MHz to 5825 MHz
Channel spacing
IEEE 802.11 b/g/n (at 2.4G): 5 MHz
IEEE802.11 a/n/ac (at 5G): 20 MHz
Wireless baud rate (data rate)
IEEE 802.11b: 1M Mbps to 11M Mbps
IEEE 802.11a/g: 6 M Mbps to 54M Mbps
IEEE 802.11n: MCS0 to MCS7
IEEE 802.11ac: MCS0 to MCS8
Output power (transfer power)
< 20 dBm (CE requirement: detection mode – RMS)
< 30 dBm (FCC requirement: detection mode – peak power)
Operating mode
Infrastructure
Data security
Standards: WPA/ WPA2 PSK, WPA/WPA2 EAP, WPA/WPA2 CCKM
EAP methods: LEAP, TTLS, TLS, FAST, PEAP-MsChapV2, PEAP-
GTC, PEAP-TLS
Encryption modes: TKIP and AES
QoS
QoS setting supported
WARNING
• Do perform all network functions of data communication within an
enclosed network.
To Next Page
Loading...
Need help?
General
