ST Monitoring Monitoring with the TM80 at the CMS
13 - 10 TM80 Telemetry Monitor Operator’s Manual
The height of gray bar indicates the baseline ST value and the green bar (cyan, yellow or
red if an alarm occurs) indicates ΔST.
13.6.3 Entering the ST View
The ST View shows a complete QRS segment for each ST lead. The color of current ST
segments and ST values is consistent with the color of ECG waveforms, normally green.
The color of baseline ST segments and ST values is white.
To enter the ST View, follow this procedure:
1. On the ViewBed screen of the CMS, select the ECG digital area or waveform area to
enter the ECG menu.
2. Select the ST tab to enter the ST menu.
3. From the bottom of the menu, select ST View.
To Next Page
Loading...
Need help?
General
