Getting Started Unpacking and Checking
TM80 Telemetry Monitor Operator’s Manual 3 - 3
3.1 Unpacking and Checking
Before unpacking, examine the packing case carefully for signs of damage. If any dam-
age is detected, contact the carrier or Mindray.
If the packing case is intact, open the package and remove the device and accessories
carefully. Check all materials against the packing list and check for any mechanical dam-
age. Contact Mindray in case of any problem.
3.2 Environmental Requirements
The operating environment of the system must meet the requirements specified in this
manual.
The equipment operating environment should be reasonably free from noises, vibration,
dust, corrosive, flammable and explosive substances.
When the device is moved from one place to another, condensation may occur as a
result of temperature or humidity difference. In this case, never start the system before
the condensation disappears.
WARNING
• The TM80 may be subject to microbacteria contamination during stor-
age, transport, or use. Prior to use, please verify that the packages are
intact, especially the packages of single use accessories. In case of any
damage, do not apply it to patients.
NOTE
• Save the packing case and packaging material as they can be used if the
device must be reshipped.
WARNING
• Make sure that the device operating environment meets the specifica-
tions. Otherwise unexpected consequences, e.g. damage to the device,
could result.
To Next Page
Loading...
Need help?
General
