Touch Screen Display General Product Description
2 - 6 TM80 Telemetry Monitor Operator’s Manual
2.6.1 Display Screen
The main screen displays patient parameters and waveforms. A typical display screen is
shown below.
1. Patient information area
This area shows the patient information such as patient category and bed number.
Tapping this area displays the Patient Info menu.
2. Alarm symbol: indicates the status of the alarm system:
â—† : indicates that all the alarms are paused.
â—† : indicates the alarm audio is turned off.
â—† : indicates that alarms are acknowledged and the alarm system is reset.
3. Mindray Patient Area Network (herein abbreviated as MPAN) indicator
â—† indicates that the TM80 is not paired with the BP10 or one TM80 is not
connected to another TM80 for configuration transfer.
â—† indicates that the TM80 is paired with the BP10 successfully or configu
ration transfer of the TM80 is in progress.
4. Wi-Fi symbol
â—† indicates that the TM80 has been connected to the Wi-Fi access point
and the signal coverage is very good. Stable data transmission via Wi-Fi net-
work can be guaranteed.
To Next Page
Loading...
Need help?
General
