Classifications Product Specifications
A - 2 TM80 Telemetry Monitor Operator’s Manual
This chapter provides specifications of the TM80 and central charger. For specifications
of BP10, refer to BP10 NIBP Module Operator’s Manual (P/N: 046-011008-00).
A.1 Classifications
The device is classified as follows according to IEC60601-1:
A.2 Environmental Specifications
Type of protection against electrical
shock
TM80: energized from an internal electrical power source.
Central Charger: class I.
Degree of protection against electrical
shock for the TM80
Type CF defibrillation proof for ECG and SpO
2
.
Mode of operation
Continuous
Degree of protection against harmful
ingress of water
TM80: IPX7
Central Charger: IPX0
Degree of protection against hazards of
explosion
Not suitable: Equipment not suitable for use in the presence of a
flammable anesthetic mixture with air with oxygen or nitrous
oxide.
Degree of protection against hazard of
dropping for the TM80
No damage by dropping from a height of 1.5 m.
WARNING
• The devices may not meet the performance specifications if stored or
used outside the specified temperature and humidity ranges.
Item Operating conditions Storage conditions
Temperature 0 °C to 40 °C -20 °C to 60 °C
Relative humidity (noncondensing) 15% to 95% 10% to 95%
Barometric 427.5 mmHg to 805.5 mmHg, or
57.0 kPa to 107.4 kPa
120 mmHg to 805.5 mmHg, or
16.0 kPa to 107.4 kPa
To Next Page
Loading...
Need help?
General
