Configuring the TM80 Configuring the Network Menu
TM80 Telemetry Monitor Operator’s Manual 12 - 13
5. Power on the TM80.
6. Press the key to enter the main menu
→ tap Maintenance→ enter the
required password
→ tap Network → tap EAP Certificate→ tap USB and then
select the desired certificate.
7. Tap Import.
12.6.6.2 Deleting Certificates
1. Press the key to enter the main menu → tap Maintenance→ enter the
required password
→ tap Network → tap EAP Certificate.
2. Tap Local.
3. Select the desired certificate.
4. Tap Delete.
Connect the USB
drive to the power
adapter
Connect
the MicroUSB
end to the TM80
USB drive used for
upgrade
To Next Page
Loading...
