4 - 26 (00292)H
Chroma Color depth (chroma)
0% Sets chroma to 0%. Black and white image.
50% Sets chroma to 50%.
100% Sets chroma to 100%. Standard chroma.
150% Sets chroma to 150%.
200% Sets chroma to 200%.
RGB Matrix Turns RGB matrix correction for image data ON/OFF.
HX, GX, Q camera setting.
Luminance Properties
Input/output properties when image data is displayed.
HX, GX, Q camera setting.
NORMAL Gain, Gamma, Knee used.
LINEAR Gain, Gamma, Knee settings ignored, data transferred to linear for
display.
CUSTOM Displays enhanced even for data with low luminance differences set
to display images with specific input/output transfer properties. Refer
to page 5-14 for details.
TABLE Function only for HX camera. Refer to page 5-15.
・"Playback Parameters (Range)"
Playback Parameters (Range)
"Playback Parameters (Range)" Items
(ID, Playback Start, Playback End settings only. The other items are for display only.)
ID Camera (DRP) ID
TYPE Camera (DRP) model
Nickname Camera (DRP) nickname (refer to page 4-2)
Status Camera status
Trigger Timing Trigger setting
Trigger Time Trigger signal input time
Playback Start, Playback End
Playback start frame/time, playback end frame/time
Rec. Start, Rec. End Recording start frame/time, recording end frame/time
Save Status Save status for camera data
To Next Page