5 - 40 (00292)H
Adds a Y axis to the graph. The added Y axis is added to “Y Axis”. The
Y axis name can be changed in “Y Axis”.
Two channels are used, and if a Y axis is added and one channel is
moved to the Y axis added, the graph is shown as follows.
Deletes the Y axis selected with “Y Axis”. If the channel on the Y axis
is registered, that channel is moved to “Channels Not Displayed”. In the
“Add Y Axis” figure above, if the Y axis where channel 1 is registered is
deleted, channel 1 is moved to “Channels Not Shown”, as shown in the
following graph.
To Next Page
