(00292)H 6 - 13
EST1 Select when inputting sync signals to the EST1 connector.
EST2 Select with any of the following.
(1) Inputting sync signals to the EST2 connector.
(2) Cameras connected to the GX-HUB, and sync signals
input to the GX=HUB EST IN connector.
EST1 Input Polarity
Selects the external sync signal polarity.
EST2 Input Polarity
Selects the external sync signal polarity.
EST１ Filter Specifies the external sync signal noise filter effect to EST1 in
microsecond units.
EST２ Filter Specifies the external sync signal noise filter effect to EST2 in
microsecond units.
Match the EST2 Filter to the EST1 Filter Settings
Match the EST2 filter settings to the EST1 filter settings.
Register User Settings
Registers the "Custom Settings" to the "User Settings".
Select "Custom Settings" with "Default Settings / User Settings" to
enable when the "Custom Settings" do not match the "User Settings".
Changing the "User Settings" with "Register User Settings" can be
controlled with a password. Refer to page 10-14 for the method of setting
passwords.
Load User Settings
Load the "User Settings" to the "Custom Settings".
Select "Custom Settings" in "Default Settings-> User Settings" to enable
when the "Custom Settings" do not match the "User Settings".
To Next Page
Loading...