(00292)H 12 - 15
12.4 Sample Sequence
(1) Sequence Repeating Recording・Save
0 VIEW -1 Start VIEW
1 ARM -1 Start recording
2 WAITMODE STOP -1 Wait for the recording to end
3 SAVEFRMRANGE 0 TRIG -100 TRIG 100 Specify save range：Block 1 (※ ) , -100~100
4 UPDATE_DRIVE Confirm USB media
5 SAVE M1 Save frames -100~100 to the USB media
6 JUMP 0 Return to the top of the sequence (0 VIEW) and repeat
※ Specify the auto pilot parameter block numbers by subtracting 1 from the GX block number.
(2) Sequence Repeating Recording・Playback・Save
0 VIEW -1 Start VIEW
1 ARM -1 Start recording
2 WAITMODE STOP -1 Wait for the recording to end
3 PLAYFRMRANGE 0 TRIG -130 TRIG 130 Playback range：Block1 (※ ) , -130~+130.
4 PLAYRATE 30 Set the frame rate to 30fps
5 CFRM 0 TRIG -130 Jump to frame number -130
6 PLAY -1 Start playback Play frame numbers -130 ~ +130 at
30fps
7 WAITMODE STOP -1 Wait for the playback to end
8 SAVEFRMRANGE 0 TRIG -100 TRIG 100 Specify save range：Block 1 (※ ) , -100~100
9 UPDATE_DRIVE Confirm USB media
10 SAVE M1 Save frames -100~100 to the USB media
11 JUMP 0 Return to the top of the sequence (0 VIEW) and repeat
※ Specify the auto pilot parameter block numbers by subtracting 1 from the GX block number.
To Next Page
