4 - 18 (00292)H
・ "Recording Parameters"
Recording Parameters (HX Camera Connection) 1
Recording Parameters (HX Camera Connection) 2
Recording Parameters (HX Camera Connection) 3
"Recording Parameters" Items
ID Camera (DRP) ID
TYPE Camera (DRP) type (For display only. Settings cannot be changed.)
Nickname Camera (DRP) nickname (refer to page 4-2)
(For display only. Settings cannot be changed.)
Status Camera (DRP) status (For display only. Settings cannot be changed.)
Segment Recording segment number (1~128)
Scene No. Photograph number (0~65535) +1 for each photograph
Frame Rate Recording frame rate (pps) (values that can be set vary by model)
Frame Size Recording frame size (values that can be set vary by model)
Blocks Select 1~64 (HX), 1~16 (GX) values for the number of blocks for partition
recording
Recording Trigger Mode Sets the recording trigger mode. Refer to page 4-60 for details.
NORMAL Normal recording
NORMAL(A) Automatically switches segments and records
NORMAL(L) Repeated recording until "Stop" is pressed
EVENT Saves external trigger signals when recording
EVENT(A) Automatically switches segments and records
EVENT(L) Repeated recording until "Stop" is pressed
BURST Records only with external trigger signal input
BURST(A) Automatically switches segments and records
BURST(L) Repeated recording until "Stop" is pressed
MULTI(A) Records the number of blocks
MULTI(C) Repeated recording until "Stop" is pressed
MULTIS(A) Automatically switches segments and
records the number of blocks
MULTIS(L) Automatically switches segments and records and
repeatedly records until Stop is pressed
MULTI1(A) Refer to page 4-63.
To Next Page