NEC DSX Software Manual

Dial Number Preview
96 ◆ Features DSX Software Manual
Dial Number Preview
Description
Dial Number Preview lets a display keyset user dial and review a number before the system dials it out.
Conditions
• None.
Default Setting
• Enabled
Programming
None
Other Related Features
Features
Central Office Calls, Placing (page 78)
Dial Number Preview allows an extension user to review a number before the system dials it out.
IntraMail Features
None
Operation
Dial Number Preview helps the user avoid dialing errors.
Using Dial Number Preview
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
To dial using Dial Number Preview:
1.
Do not lift the handset and do not press SPEAKER or INTERCOM.
2.
Dial *.
• Your display shows: DIAL PREVIEW.
3.
Dial the number you want to call.
• Your display shows the digits for your call.
4.
Press a line key.
• Your call will dial out on the line selected.
Editing the Displayed Number
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
To correct the displayed digits before dialing them out:
1.
Press Volume Up or Volume Down until the cursor replaces the digit you want to change.
• Volume Up moves the cursor left; Volume Down moves the cursor right.
2.
Dial the digit that you want to replace the cursor.
3.
Do one of the following.
a.
Press Volume Up or Volume Down to place the cursor over any other digits you want to edit.
b.
Press Volume Down until the entire number displays to the left of the cursor.
• The system will only dial the digits to the left of the cursor.

NEC DSX Specifications