NEC DSX - 3103-03: Loop Length

31xx-Configuration
310x-Setup
3103-Settings
DSX Software Manual Line Options: 3101-3714 ◆ 815
Line
3101-3715
3103-03: Loop Length
(Loop Length)
Use this option to compensate for a line’s loop length. Use the default option for normal installations. Use
the short option only when the system is very close to the central office or behind a PBX. Use the long
option when the loop length is abnormally long.
Set this option for optimal speakerphone performance.
Features
• Central Office Calls, Answering (page 74)
• Central Office Calls, Placing (page 78)
IntraMail Features
• None
Options
• 0 for default (normal)
•
1 for short loop
• 2 for long loop
Default
•0