16xx-Timers
161x-COI (Analog Line) Timers
1613-Loop Control
DSX Software Manual System Options: 1001-1702 ◆ 689
System
1001-1702
1613-03: Power Failure Recovery Detect Timer
(Loop Recovery)
Use this option to set the Power Failure Recovery Detect time. When the ATRU or COIU PCB recovers from
a power failure, it checks the power failure line for loop current for this interval. If loop current is detected, it
assumes the power failure telephone is still connected and does not tear down the call. If loop current is not
detected, the PCB switches the line out of the power failure mode.
Features
• None
IntraMail Features
• None
Options
• 64-16320 mS
Default
• 3008 mS
To Next Page
Loading...
