NEC DSX Software Manual

Intercom
DSX Software Manual Features ◆ 213
Features
Operation
User Programmable Feature
Placing and Answering Intercom Calls
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
To place an Intercom call:
1.
Lift handset and press INTERCOM.
2.
Dial your co-worker’s extension number (300-427).
• To call the operator, dial the operator’s extension number or dial 0 or 01-04 (depending on your system setup).
• If your call voice-announces the destination, you can dial 1 to force the call to ring.
To answer an intercom call:
1.
Do one of the following
a.
If you hear two beeps (your phone has Handsfree Answerback):
• Speak toward the phone.
OR
• Lift handset for privacy.
b.
If you hear one beep (your phone does not have Handsfree Answerback):
• Lift the handset for privacy.
c.
If you hear ringing, lift the handset.
Setting Up Incoming Voice Announcements
Feature Mnemonic Operation Access Level
Intercom
#VA (#82)
#VA
+ V for voice ann. or R for ring + SPEAKER to exit. 3-5

NEC DSX Specifications