NEC DSX Software Manual

41xx-Configuration
411x-Ports (Voice Mail Port Setup)
4111-Options (Voice Mail Port Options)
DSX Software Manual Voice Mail Options: 4101-4231 ◆ 865
Voice Mail
4101-4231
411x-Ports (Voice Mail Port Setup)4111-Options (Voice Mail Port Options)
Description
Use this program to enter the voice mail port name as well as set the voice mail Class of Service and Toll
Restriction Level.
Options
4111-01: Voice Mail Port Name
(Name)
Use this option to modify the name for all voice mail ports. The system displays this name when a keyset
user calls a voice mail port (either by pressing V-MAIL or dialing the master number). You should always end
the name with the # character. The system substitutes the port number for the #. Using the default name VM
PORT # for example, the keyset display shows VM PORT 1 when calling port 1.
Features
• Voice Mail (page 372)
IntraMail Features
• None
Options
• See Name Programming Chart (page 867)
Default
• VM PORT #
4111-02: Voice Mail Port Class of Service
(COS Level)
Use this option to set the Class of Service for all voice mail ports. Normally, you use the voice mail port
Class of Service to control Message Notification callouts.
Features
• None
IntraMail Features
• Message Notification (page 535)
Options
• 1-15 for Class of Service 1-15
Default
•2

NEC DSX Specifications