NEC DSX Software Manual

11xx-CPU
111x-Tones
1111-DTMF Setup
608 ◆ System Options: 1001-1702 DSX Software Manual
111x-Tones1111-DTMF Setup
Description
Use this program to set the DTMF durations for manual and Speed Dial calls.
Options
1111-01: Manual DTMF Tone On
(Man DTMF On)
Use this option to set the duration of DTMF digits for outside calls manually dialed by an extension user.
This is required because the system buffers the digits the user dials. Set this timer for compatibility with the
connected telco or PBX/Centrex.
F
eatures
• Central Office Calls, Placing (page 78)
IntraMail Features
• None
Options
• 10-2550 mS
Default
• 150 mS
1111-02: Manual DTMF Tone Off
(Man DTMF Off)
Use this option to set the duration of the interval between DTMF digits for outside calls manually dialed by
an extension user. This is required because the system buffers the digits the user dials. Set this timer for com-
patibility with the connected telco or PBX/Centrex.
Features
• Central Office Calls, Placing (page 78)
IntraMail Features
• None
Options
• 10-2550 mS
Default
• 100 mS
1111-03: Speed Dial DTMF Tone On
(SPD DTMF On)
Use this option to set the duration of DTMF digits for Speed Dial outside calls automatically dialed by the
system. Set this timer for compatibility with the connected telco or PBX/Centrex. If you set this interval too
short, the telco or PBX/Centrex may not be able to properly detect the DTMF digit. If too long, outbound
dialing is unnecessarily slowed down.
Features
• Central Office Calls, Placing (page 78)
IntraMail Features
• None
Options
• 10-2550 mS

NEC DSX Specifications