NEC DSX Software Manual

Charts
DSX Software Manual Introduction ◆ 5
Introduction
Charts
DSX Dial Codes by Feature (Page 1 of 2)
For this feature Dial this code When you are
Barge In (Intrusion)
4
Barging-In on a co-worker’s call
Call Forwarding
INTERCOM
+ *30 Canceling Call Forwarding at an
extension
INTERCOM + *32 + Extension or 0
(for the operator)
Enabling Call Forwarding Busy/No
Answer
INTERCOM + *33 Setting up Call Forwarding Off
Premise
INTERCOM + *34 + Extension or 0
(for the operator)
Enabling Call Forwarding All Calls
INTERCOM + *36 + Extension or 0
(for the operator)
Enabling Call Forwarding No Answer
INTERCOM + *37 + 2 (all calls) or 8
(outside calls)
Setting up Personal Answering
Machine Emulation
Call Waiting / Camp-On
2
+ Do not hang up
2 + Hang up
Camping-On to a co-worker
Leaving a Callback for a co-worker
Central Office Calls, Placing
INTERCOM
+ #9 + Line number
(e.g., 01)
Using Line Dial-Up to place an out-
side call
INTERCOM + Line extension number
(e.g., 101)
Using Direct Line Access to place an
outside call
INTERCOM + 9 or 90-98 Accessing a Line Group to place an
outside call
Dial Number Preview
*
Previewing a number before dialing
Directed Call Pickup
INTERCOM
+ ** + Extension Intercepting a call ringing a
co-worker’s extension
Flash
#3
Flashing a line at a single line
extension
Forced Line Disconnect
#
Using Forced Line Disconnect to dis-
connect a busy outside line
Group Call Pickup
INTERCOM
+ *# Answering a call ringing a phone in
your Pickup Group
Hold
INTERCOM
+ *4 + Line number (e.g.,
01)
Picking up an outside call on System
Hold at a co-worker’s extension
Intercom
INTERCOM
+ Extension (e.g., 301) Placing an Intercom call to a co-
worker
Meet-Me Conference
INTERCOM
+ #11 or # 12 Setting up or joining a Meet-Me Con-
ference

NEC DSX Specifications