NEC DSX Software Manual

Toll Restriction
DSX Software Manual Features ◆ 353
Features
❥ When you dial: 1010 220 203 926 5400
Equal Access (1010 XXX) Dialing is controlled by the Equal Access codes entered in 352x-1010-XXX /
Local XXX (Equal Access Dialing) (page 844).
- The table entries have no affect on the less common 101X XXX Equal Access dialing.
❥ When you dial: 1 800 365 1928, 1 900 555 1212, 1 926 5400
1 + NPA and 1 + NXX dialing is controlled by the entries in 353x-1+XXX / TBL-A XXX (NPA/NXX Dial-
ing 3-Digit Table) (page 846) and 354x-1+XXX-XXX / TBL-A XXXXXXX (1 + NPA + NXX Dialing 6-
Digit Table) (page 848).
- These tables work together. For example, you can deny an NPA in 353x and allow a specific NPA +
NXX combination in 354x.
❥ When you dial: 203 926 5400, 926 5400
NPA and NXX dialing (without the leading 1) is controlled by the entries in 355x-XXX / TBL-B-XXX
(NPA/NXX Dialing 3-Digit Table) (page 850) and 356x-XXX-XXX / TBL-B XXXXXX (NPA + NXX Dial-
ing 6-Digit Table) (page 852).
- These tables work together. For example, you can allow an NPA in 355x and deny a specific NPA +
NXX combination in 356x.
Default Toll Restriction Configuration
When you assign a Toll Level to an extension, the extension has the following Toll Restriction by default:
❥ Active Key Pad is enabled.
❥ N11 Dialing is enabled.
❥ 0 + Dialing is enabled.
❥ International (011) Dialing is enabled.
❥ Equal Access (101X + XXX) Dialing is enabled.
❥ Equal Access (1010 + XXX) Dialing is enabled without restriction because the 1010 + XXX Equal
Access Table is a deny table with no entries (i.e., it denies nothing).
❥ 1 + NPA/NXX Dialing is enabled without restriction because the 1 + NPA/NXX Dialing 3-Digit and 1 +
NPA + NXX Dialing 6-Digit Tables are deny tables with no entries (i.e., they deny nothing).
❥ NPA/NXX Dialing and NPA + NXX Dialing are enabled without restriction because the NPA/NXX Dialing
3-Digit Table is a deny table with no entries (i.e., it denies nothing). In addition, the NPA + NXX Dialing 6-
Digit Table does not restrict because it is a deny table with no entries (i.e., it also denies nothing).
Conditions
• None
Default Setting
• See Default Toll Restriction Configuration above.

NEC DSX Specifications