42xx-IntraMail
423x-Dial Actions (Dial Action Table Options)
4231-Digit Assignment
908 ◆ Voice Mail Options: 4101-4231 DSX Software Manual
REC2 Action - Quick Message Without Greeting (4)
(REC2)
Use this action to allow an Automated Attendant caller to leave a Quick Message at an extension. With this
action, the caller will not hear the extension’s greeting prior to leaving the message. Instead, the caller hears
the voice prompt “Recording” followed by a beep.
Routing
To have the caller leave a quick Message at a specific extension, the corresponding Routing option should be
the extension number.
To have the caller leave a Quick Message at any caller-dialed extension, the corresponding Routing option
should be IXXX.
To have the caller leave a Quick Message at a caller-dialed extension in a specific range, the corresponding
Routing option should be XXX.
• For example, to allow callers to leave a Quick Message extensions 300-399, for key 3 enter REC2 for
the Action and XXX for the corresponding Routing.
F
eatures
• None
IntraMail Features
• Quick Message (page 560)
Options for Action
• 4 for REC2
Options for Routing
• Digits using 0-8, # and * (8 max.)
• N for no routing (press Feature Key 1)
• I for ignore caller dialed digit (press Feature Key 2)
• X for caller dialed digit (press Feature Key 3)
• P for pause (press Feature Key 4)
Default
• See the Dial Action Table Default Settings (page 902).
To Next Page
Loading...
