NEC DSX Software Manual

33xx-DID (Direct Inward Dialing)
330x-Setup
3302-Translations
836 ◆ Line Options: 3101-3714 DSX Software Manual
Options
3302-01: Incoming DID Digits
(Incoming Digits)
For the table entry you are programming, use this option designate the incoming digits you want to translate.
Features
• Direct Inward Dialing (page 99)
IntraMail Features
• None
Options
• Digits (1-8 digits using 0-9)
• * (wild card representing any digit)
Default
• *** for entry 001. All other table entries blank.
3302-01: Day Translation Destination
(Day Translation)
For the table entry you are programming, use this option to designate the day mode destination for the
incoming DID digits.
Features
• Direct Inward Dialing (page 99)
IntraMail Features
• None
Options
• Digits (1-8 digits using 0-9)
• * (wild card representing any digit)
Default
• 3** for entry 001. All other table entries blank.
3302-01: Night Translation Destination
(Night Translation)
For the table entry you are programming, use this option to designate the night mode destination for the
incoming DID digits.
Features
• Direct Inward Dialing (page 99)
IntraMail Features
• None
Options
• Digits (1-8 digits using 0-9)
• In the day, all calls in the 3xx range route to their respective extensions. The day mode exception rout-
ing for 301 and 302 is ignored.
• Only at night is the exception routing for 301 and 302 in force.
Ranges and Exceptions – Incorrect Configuration
Table Entry Digits Received Day Route Night Route

NEC DSX Specifications