NEC DSX - 3101-03: DTMF Dialing; 3101-04: PBX Line; 3101-05: E1 Signaling Type

31xx-Configuration
310x-Setup
3101-Type
DSX Software Manual Line Options: 3101-3714 ◆ 811
Line
3101-3715
3101-03: DTMF Dialing
(DTMF Dialing)
Use this option to set the type of dialing used by the line (DTMF or Dial Pulse).
Features
• Central Office Calls, Answering (page 74)
• Central Office Calls, Placing (page 78)
• Direct Inward Dialing (page 99)
• Direct Inward Line (page 109)
• Pulse to Tone Conversion (page 285)
• T1 Lines (page 338)
• Tie Lines (page 344)
IntraMail Features
• None
Options
• No (0) - Dial Pulse
• Yes (1) - DTMF
Default
• Yes (1) - DTMF
3101-04: PBX Line
(PBX Line)
Use this option to designate a line as a PBX line. Enable this option if the line connects to a PBX instead of
the telco.
Features
• PBX / Centrex Compatibility (page 270)
IntraMail Features
• None
Options
• No (0) - Disabled
• Yes (1) - Enabled
Default
• No (0) - Disabled
3101-05: E1 Signaling Type
(E1 Signaling)
For E1 lines only, use this option to specify the E1 Signal Type 0-9. Set this option for compatibility with the
connected telco.
Features
• N/A
IntraMail Features
• None
Options
• 0 for Q.421
• 1 for Q.421 Pls Clear
• 2 for Q.421 Pls Answer
• 3 for Brazil #1
• 4 for Brazil #2
• 5 for Brazil #3
• 6 for Brazil #4