NEC DSX Software Manual

Direct Inward Dialing
DSX Software Manual Features ◆ 105
Features
DID Station Intercept and Line Overflow
The following table shows the detailed interaction between DID Station Intercept and Line Overflow for unan-
swered DID Calls. These interactions occur when an extension has DID Station Intercept enabled, the DID line
has Line Overflow enabled, and the call is not intercepted by either Call Forwarding or Extension Hunting.
DID Station Intercept and Line Overflow
Destination Extension
Station Intercept DID Camp-On Ring No Answer Busy In DND
None
(0)
1 (Enabled) • If unanswered, call
routes to Line Over-
flow.
• Call Camps-On to extension.
• If unanswered, call routes to Line Overflow.
0 (Disabled) • If unanswered, call
routes to Line Over-
flow.
• Caller hears busy tone and call does not
reroute.
Busy / DND
(1)
1 (Enabled) • If unanswered, call
routes to Line Over-
flow.
• Call Camps-On to
extension.
• If unanswered, call
routes to Line Over-
flow.
• Call routes to inter-
cept destination.
• If unanswered, call
routes to Line Over-
flow.
0 (Disabled) • If unanswered, call
routes to Line Over-
flow.
• Call routes to intercept destination.
• If unanswered, call routes to Line Overflow.
Ring No Answer
(2)
1 (Enabled) • If unanswered, call
routes to intercept
destination.
• If still unanswered,
call routes to Line
Overflow.
• Call Camps-On to extension.
• If unanswered, call routes to Line Overflow.
0 (Disabled) • If unanswered, call
routes to intercept
destination.
• If still unanswered,
call routes to Line
Overflow.
• Caller hears busy tone and call does not
reroute.
Busy / Ring No
Answer (3)
1 (Enabled) • If unanswered, call
routes to intercept
destination.
• If still unanswered,
call routes to Line
Overflow.
• Call Camps-On to
extension.
• If unanswered, call
routes to intercept
destination.
• If still unanswered,
call routes to Line
Overflow.
• If unanswered, call
routes to intercept
destination.
• If still unanswered,
call routes to Line
Overflow.
0 (Disabled) • If unanswered, call
routes to intercept
destination.
• If still unanswered,
call routes to Line
Overflow.
• Call routes to intercept destination.
• If unanswered, call routes to Line Overflow.
• All Camp-On and Ring No Answer intervals are set in 1601-02: DIL No Answer Timer (page 669).

NEC DSX Specifications