NEC DSX - 903 X-Swap Ports; 9031-Station Swap

90xx-Utilities
903x-Swap Ports
9031-Station Swap
DSX Software Manual Maintenance Options: 9001-9211 ◆ 925
Maintenance
9001-9032
903x-Swap Ports9031-Station Swap
Description
Use this program swap two extensions. This swaps all the programming between the two extensions, includ-
ing the extension number and station name. With 9031-Station Swap, it is no longer necessary to install and
wire cross-connect blocks to easily swap two extensions.
Options
9031-01: Station Swap
(Swap with Ext)
This option allows you swap two extensions. This swaps all the programming between the two extensions. If
the extension being swapped is a 2PGDAD Module Door Box port with the secondary port assigned, this
program will also swap the secondary port.
Features
• None
IntraMail Features
• None
Options
• See below.
Default
• None
Using 9031-01: Station Swap
To swap two extensions:
1.
Access option 9031-01.
2.
Press TRANSFER and select the first extension.
3.
Press HOLD and enter the second extension.
4.
Press HOLD again to make the swap. You see: Swap Complete!
• You cannot swap an extension busy on a call.